GET IN TOUCH

contact@fatblackcat.io

Budowlana 50/307, 20-469 Lublin, Poland

My account

KNOWLEDGE BASE · PurrOS & SimHub · PurrOS & SimHub

PurrForce control in PurrOS: haptics for iRacing without SimHub

PurrOS can play your PurrForce haptics directly in iRacing, with no SimHub. PurrForce control is an early alpha release: effects and settings may still change.

  • PurrOS · all products
  • Updated 25 Oct 2026

PurrOS can play your PurrForce haptics directly in iRacing, with no SimHub. This is PurrForce control. It is an early alpha release for iRacing: effects and settings may still change.

What do I need?

  • Windows, with the latest PurrOS installed. See Where to download everything.
  • iRacing. It is the only sim PurrForce control works with at the moment. For any other sim, use SimHub: see PurrForce haptics in SimHub — setup.
  • Your pedals connected and powered. The PurrForce haptics are built into the pedals.
  • A profile loaded or created in PurrOS.

PurrForce control works the same with PurrPRO FORMULA PEDALS and PurrPRO GT PEDALS.

Where do I find PurrForce control?

Click your pedal set’s tile on the Home screen, or the Quick access shortcut, to open its settings, and choose the PurrForce control tab. It carries an alpha badge.

The tab stays disabled until a profile file is loaded or created. If it is disabled, its tooltip reads “Create or load a profile file before editing PurrForce control”. See PurrOS profiles.

What does the tab show?

The tab has a column for each pedal and a Master level slider across the bottom, which sets the overall level of all effects. The Game menu lists iRacing; entries that are greyed out are not available. The status line shows Game connected when iRacing is running, and Waiting for game until then.

The tab also shows whether each of the two PurrForce devices is detected.

Which effects can I set?

  • Brake: ABS and Grip Loss.
  • Throttle: Engine vibration and Traction control.

Each effect has an on/off toggle, a Test button, sliders and a Live output graph. The sliders differ by effect. The Test button plays about a second of that effect at its current settings, with no game running, so you can feel a change straight away. Engine vibration pauses while Traction control is active.

How do ABS and Grip Loss work together?

ABS vibrates only once the car’s ABS is working. Until then the ABS effect shows Pending, or Locked on cars without ABS. While the car’s ABS is working, Grip Loss is weaker and shows Locked.

What is Grip Loss?

Grip Loss adds vibration when the front tyres lose grip under braking. It is not wheel lock detection.

Where are the settings stored, and how do I keep them?

Changes you make in the PurrForce control tab apply to the haptics straight away. To keep them, click Save profile: PurrOS writes them to your profile, the .fbc_profile file, only then. Save profile is clickable only when there are unsaved changes. Saved settings apply when PurrOS starts, and whenever a profile is loaded or discarded.

If you leave with unsaved changes, PurrOS asks “Unsaved changes”: “You have unsaved changes to the active profile. What would you like to do?”, with Cancel, Discard or Save. It asks when you close PurrOS, leave your pedal set’s settings, load or switch to another profile file, or switch to another connected unit.

The settings are not stored on the pedals and there is no Send to device step for them. PurrOS must be running for PurrForce control to work. See Send to device: what the button shows and what greyed out means.

Do I need SimHub?

Not for iRacing. Use either PurrForce control in PurrOS or SimHub for your haptics, not both at the same time.

What if a device shows as not detected?

  1. Check that both PurrForce devices are plugged in.
  2. In Windows Sound settings, under Output, check that they appear with names containing “PurrForce HC BRK” and “PurrForce HC T/C”. Do not rename them.
  3. Restart PurrOS and look at the tab again.

If one pedal is silent in every app, see How do I test whether a shaker or its power supply is the problem? and One pedal completely dead.

What if I feel nothing?

Check these in order:

  • iRacing is running and the tab shows Game connected.
  • Press Test on the effect.
  • The effect is switched on and, where it has a Deadzone slider, the deadzone is not set too high.
  • The ABS effect shows Pending until the car’s ABS is working, and Locked on cars without ABS.
  • After you reconnect a device, restart PurrOS.
  • If SimHub was running, close SimHub and restart PurrOS.
  • Check that the PurrForce devices are not muted or at zero in Windows Sound settings.

What are the current limits?

  • PurrForce control is an early alpha release. Effects and settings may still change.
  • It works with iRacing only, on Windows.
  • Grip Loss is not wheel lock detection.

Related articles

PurrForce haptics in SimHub — setup, PurrOS profiles: save, load, export and Load device profile, PurrOS Home screen and sidebar: what you see and where to click, Where to download everything, Send to device: what the button shows and what greyed out means.

WAS THIS HELPFUL?

STILL STUCK?

Talk to us

A human answers, usually within minutes. Your question reaches the people who designed and assembled the pedals.