KNOWLEDGE BASE · Setup & adjustment · Pedal adjustment
Throttle: travel, stiffness, preload, damping
Travel: loosen the M4 bolt on the side of the base (don't remove) and move the slider. Positions: 1 = 35 mm, 2 = 54 mm, 3 = 73 mm, 4 = 91 mm at the top edge…
- PurrPRO FORMULA PEDALS
- Updated 6 Sep 2026
- Travel: loosen the M4 bolt on the side of the base (don’t remove) and move the slider. Positions: 1 = 35 mm, 2 = 54 mm, 3 = 73 mm, 4 = 91 mm at the top edge of the face. Re-torque to 3 Nm so it can’t slide. The bolt head must sit outside the pedal outline so it can’t catch.
- Stiffness: three positions on the throttle arm via the Magnetic Quick Pin. Top hole = stiffest/steepest gradient, bottom = softest/flattest. Loosen preload first; mind the rod-end bearing so it doesn’t fall out of its pocket.
- Preload: loosen counter nut → rotate preload nut to compress the spring → re-tighten counter nut.
- Damping: knob at the rear, 0–9, continuous rotation. Start at 4 and tune.
- An optional LIGHT THROTTLE SPRING (€20.30) is available for those who find even minimum preload too heavy.
WAS THIS HELPFUL?
STILL STUCK?
Talk to us
A human answers, usually within minutes. Your question reaches the people who designed and assembled the pedals.